Zircon® 61903 StudSensor™ Pro SL-AC Finder with SpotLite® Pointing System
StudSensor™ Pro SL-AC quickly and easily locates the edges of wood and metal studs and joists behind walls, floors, and ceilings. The patented SpotLite® Pointing System shines a beam of light on the wall to identify the target, and WireWarning detection indicates live AC voltage. Its tough, ergonomic housing withstands everyday jobsite use.
- Stud Scan mode locates the edges of wood or metal studs up to 3/4″ (19 mm) deep
- Red LEDs light up every time a stud edge is approached
- The patented SpotLite® Pointing System and green LED signals when the stud edge is reached
- WireWarning detection indicates the presence of live, unshielded electrical wiring up to 2″ (51 mm) deep
- Should scanning begin over a stud, Zircon® patented “over-the-stud” indicator alerts the user to start the scan in a new location
- Patented TruCal® technology calibrates to any wall’s density and a steady green LED light alerts the user when the tool is calibrated and ready to scan
- DeepScan® mode for finding studs up to 1-1/2″ (38 mm) deep behind drywall paneling, or plywood, or a combination of both, and through most bare wood flooring
- For safety it indicates the presence of AC voltage while scanning.
Specifications:
- Dimensions: 6.07″ (H) x 2.70″ (W) x 1.18″ (D)
- Battery Type: 9-V alkaline (not included)
- Battery Life: alkaline battery
- position: Up to a depth of 3/4″
- AC Position Typically: 90-250 V at 50-60 Hz
- Operating Temperature: 20 degree to 120 degree F (-7 degree to 49 degree C)
- Storage Temperature: -20 degree to 150 degree F (-29 degree to 66 degree C)
- Humidity: 80% RH (noncondensing)
- Water Resistance: Splash and water resistant, not waterproof
-
Depth:
- Stud Scan mode: up to 3/4 (19 mm)
- DeepScan mode: up to 1-1/2″ (38 mm)
