Varathane 211796 Premium Oil Based Wood Stain 1/2 Pt, Light Walnut
Varathane Premium Wood Stain penetrates up to twice as deep as competitive brands to reveal the beauty of natural wood grain. Apply to wood for long-lasting, translucent stain. Uses exclusive soya-oil base and anti-settling formula for better grain enhancement with less stirring during application.
- Size: 1/2 Pint
- Color: Light Walnut
- Superior soya oil base
- Premium pigments
- Formulated for deeper penetration & clearer color
- For all interior wood including furniture, cabinets, doors, trim, floors & paneling
Application Tip:
Stir thoroughly. On bare wood apply the stain across the grain until the wood is saturated on top. Wipe off the excess after 5-10 minutes.
Uses:
Varathane Premium Interior Wood Stains are designed to provide deeper, richer, and more natural color for all wood projects. These stains are ideal for use on wood furniture, cabinets, doors, trim, floors, and paneling. For interior use only.
Product Application:
Surface Preparation
Remove any existing finishes with sandpaper or stripper. Prepare bare wood for staining by sanding in the direction of the grain. Begin with #120 grit sandpaper and progress though #150, #180 and #220 grits.
Before staining, remove all sanding dust and dirt with a vacuum, tack cloth, or rag dampened with mineral spirits. For grease or glue, remove with a clean rag dampened with mineral spirits. Soft woods such as pine, fir, or maple require a wood conditioner. Use Varathane Premium Wood Conditioner before staining.
WARNING!
If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
Testing Color
Be sure to test your stain to verify the desired color. To test, apply the stain in an inconspicuous area. When testing on soft wood, be sure to sand and condition the test area. To achieve a lighter color, wipe the stain immediately after application. For a deeper color, allow the stain to set for 1 hour before wiping, or apply additional coats of stain.
Application
Use only when air (ambient) temperature is between 55-90°F (13-32°C) and relative humidity is below 85%. Stir the contents thoroughly to ensure any settled pigment is re-dispersed before application. Apply with a brush or clean, lint-free cloth. Apply the stain across the grain until the wood is saturated on top. Wipe the excess stain off in the direction of the wood grain. Do not let the stain dry before wiping off the excess. A second coat can be applied after 2 hours. Do not sand between stain coats.
Protecting The Wood
Allow Varathane Premium Wood Stains to dry for 8 hours when applying an oil-based finish or 24 hours before applying a waterbased finish.
Clean-Up
Clean application tools and equipment with mineral spirits or paint thinner.
